ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32)

Employer
USAJobs
Location
Andrews AFB, Maryland
Posted
Jan 08, 2022
Closes
Jan 16, 2022
Hours
Full Time
Duties

As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), WG 2610 12/13, you will perform but are not limited to:
The primary purpose of this position is perform scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Complete operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Review and analyze maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Advise Aerospace Engineering personnel on the operation and maintenance effects of proposed Time Compliance Technical Orders (TCTO) modifications on new or existing equipment. Troubleshoot operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Perform on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinate back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Conduct aircrew debriefing to determine the nature of system malfunctions. Perform other duties as assigned.

Requirements

Conditions of Employment

  • National Guard Membership is required.
  • Males born after 31 December 1959 must be registered for Selective Service.
  • Federal employment suitability as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • Participation in direct deposit is mandatory.
  • Minimum Rank: E-3/A1C
  • Maximum Rank: E-7/MSgt
  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
  • Selectee will be required to wear the military uniform.
  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
  • For positions requiring the operation of motor vehicles, candidates must have a valid state drivers license.
  • Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.
  • AFSC: 2A3X4, 2A3X4C


Qualifications

This is an excepted service position that requires membership in a compatible military assignment in the DC Air National Guard.

MILITARY REQUIREMENTS:
You must meet the minimum military rank as specified in this announcement. If you are not sure you are eligible for military membership, please contact a DC Air National Guard recruiter prior to applying for this position. Applicants applying to this position who exceed the maximum military grade listed on this job announcement MUST submit a statement in writing that they are willing to take an administrative reduction in grade to the advertised military grade on the job announcement for which applying. Applicants who exceed the military grade will NOT be placed into the technician position until they have been administratively reduced to the military grade on the job announcement. Please note that exceeding the maximum rank does not automatically qualify you for consideration. Compatible military grade and assignment required prior to the effective date of placement.

The National Guard's full-time support program requires that all military technicians are members of the National Guard and are appointed to full-time positions which correspond to their military assignments. Applicants who are not currently a member of the National Guard must be eligible for immediate membership.

Minimum Rank: E-3/A1C
Maximum Rank: E-7/MSgt
Compatible Military Assignments:2A3X4, 2A3X4C
Other requirements: For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within One (1) year of appointment.

THE FOLLOWING QUALIFICATIONS MUST BE REPRESENTED BY THE CONTENTS OF YOUR RESUME. To ensure full credit is given for the qualification requirements listed below please use the USAJobs resume builder.

IF YOU USE YOUR OWN RESUME PLEASE ENSURE THAT YOU INCLUDE THE BEGINNING AND ENDING DATES (MONTH AND YEAR) FOR ALL JOBS LISTED IN YOUR RESUME.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.


GENERAL EXPERIENCE: Must possess experience which demonstrates the applicants knowledge of electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate deficiencies. Thorough knowledge of principles of digital and analog circuits, electro-mechanical devices, solid state devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret and trace schematics, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE).

SPECIALIZED EXPERIENCE:

To credit work experiences gained from completing the compatible AFSC technical training school program, the applicant must submit technical school certificate(s) and student evaluation(s) to support/verify AFSC work experiences and skills performed while attending the applicable Air Force technical school(s).

WG-12: Candidate must have at least a three-skill level in one of the compatible AFSCs, with 12 months of work experiences.

WG-13: Candidate must have 36 months specialized experience in addition to the journeyman level knowledge, experience which demonstrates the ability to plan, direct, and organize work assignments for lower grade personnel. Experience which required the review of work requirements and establish priorities to meet deadlines. Experience that provided knowledge of various lines of work performed by this function. Experience which demonstrates the ability to supervise or the potential to perform such duties as evidenced by the ability to communicate knowledge of general supervisory concepts, and knowledge of shop processes. Experience in adapting existing equipment and techniques to new situations.

BASIC QUALIFICATION REQUIREMENTS: To qualify an applicant for one of the FWS Series 2610 ANG Dual Status Technician positions, apply and evaluate the applicant's competencies, military and civilian experiences, completed education, learned skills, obtained knowledge, endorsed abilities, and training program accomplishments. The following seven basic qualification factors are applicable to the FWS ANG Dual Status Technician positions:
  • Skilled in collecting and analyzing data effectively, efficiently, and accurately
  • Ability to communicate clearly and effectively
  • Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes
  • Ability to format and write English in reports and presentation formats
  • Skilled in presenting formal training presentations and briefings
  • Skilled in applying procedures and directives by reading and interpreting material
  • Skilled in training, mentoring, leading, and problem-solving

Other Qualifications
To initially qualify and prior to appointment, an applicant's military medical record must indicate a completed and current medical physical, medical profile, a cleared drug test; and, normal color vision as defined in AFI 48-123, Medical Examinations and Standards.
To initially qualify and as a condition of continued dual status technician employment, must have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time.
As a condition of continued dual status technician employment, the employee must complete the hazmat certification within six months of employment and complete hazmat recertification every two years.
As a condition of continued dual status technician employment, the employee must maintain the position's mandatory AFSC skill level and continue on-the-job proficiency requirements.
As a condition of continued dual status technician employment, the employee requires routine access to classified Secret material or similar environment. For award and retention of a compatible AFSC, the employee must have a current National Agency Check, Local Agency Checks and Credit (NACLC) according to AFI 31-501, Personnel Security Program Management. The employee's clearance reinvestigations must be opened prior to the expiration of his or her current investigations.

Education

ANG ENLISTED: To qualify an enlisted applicant for hire consideration into an ANG Dual Status Technician FWS 2610 position, award of the compatible Air Force Specialty Code, Craftsman Seven Skill Level; Journeyman Five Skill Level; or, the Apprentice Three Skill Level, with the position's compatible unit position assignment and a high school diploma, are mandatory requirements. Completion of high school courses in physics, algebra, trigonometry, and computer principles is desirable. Higher academic college courses and degrees that are aligned within the FWS Series 2610 type of work tasks are also desirable.

For the WG-2610-12 ANG Dual Status Technician positions, the mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC.

For the WG-13 ANG Dual Status Technician positions, the mandatory military education requirements are the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC, along with the successful completion of at least one military professional education course program.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).

If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application .

Similar jobs