Duties

• Assist in the design and development of engineered devices, equipment or systems using established criteria or specifications.
• Assist in the inspection and evaluation of engineered devices, equipment or systems using established criteria.
• Identify engineering problems and recommend corrective action.
• Review technical engineering project design documents, computations, and submittals.
• Prepare technical engineering reports and studies with completeness, technical adequacy, and adherence to prescribed format of reports.

Requirements

Conditions of Employment

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Must sign a mobility agreement if selected.
• Two year trial/probationary period may be required.
• A Personnel Security Investigation is required.
• Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
• Pursuant to EO 14043, all Federal employees, regardless of duty location or work arrangement, must be fully vaccinated for COVID-19 by November 22, 2021, or before entrance on duty if after November 22, subject to exceptions as required by law.
• If selected, the agency will provide information regarding what documentation is needed and how to request any legally required exceptions from this requirement.
• Proof of vaccination will be required. To ensure compliance with this mandate, review the vaccination requirements, to include timelines for receiving required doses, at the following: https://www.saferfederalworkforce.gov/faq/vaccinations/

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document .

Basic Requirement for General Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Degree must be completed by December 2021.)

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes assisting in the design and development of engineered devices, equipment or systems using established criteria or specifications; or, assisting in the inspection and evaluation of engineered devices, equipment or systems using established criteria; or, assisting in identifying engineering problems and recommending corrective action; or, reviewing technical engineering project design documents, computations and submittals for accuracy. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).

OR

Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering.

OR

Superior Academic Achievement: Successful completion (or completion no later than December 2021) of all the requirements for a bachelor's degree with Superior Academic Achievement (S.A.A.). In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:
(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR
(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR
(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies ( https://www.achsnatl.org/ ).

NOTE: If more than 10 percent of your undergraduate course work (credit hours) was taken on a pass/fail or similar basis, your S.A.A. claim must be based on class standing or membership in an honor society and you must provide evidence of your class standing or honor society membership with your application.

NOTE: Grade point averages will be rounded to one decimal point. For example, 2.95 will round to 3.0, and 2.94 will round to 2.9.

OR

5-Year Engineering Program: Successful completion (or completion by December 2021) of a 5-year program of study (i.e., one designed to be completed in no less than 5 years) of at least 160 semester hours leading to a bachelor's degree in engineering in an ABET accredited college or university.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

• You will be required to provide proof of U.S. Citizenship.
• Direct Deposit of Pay is required.
• This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
• Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
• If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
• This is a Career Program (CP) 18 - Construction, Engineering, and Infrastructure position.
• Multiple positions may be filled from this announcement.
• Salary includes applicable locality pay or Local Market Supplement.
• When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
• If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application .
• Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
• If applying based on education, unofficial transcripts must be submitted at the time of application. If selected, official college or university transcripts must be provided.
• This recruitment provides promotion opportunity to the target grade of the position without further competition when selectee is eligible and recommended by management.
• Incumbent works under closer supervision and works in a developmental capacity performing assignments and completing training, both of which are aimed in preparing the incumbent to gain the knowledge and skills necessary to perform the duties outlined in the aforementioned job description. The incumbent receives progressively more responsible assignments as experience and training are received to the next higher level position.
• Due to COVID-19, the agency may be in an expanded telework posture. If selected, you may be expected to temporarily telework, even if your home is located outside the local commuting area. Once employees are permitted to return to the office, you would be expected to report to the duty station listed on this announcement within a designated timeframe identified by the organization. At that time, you may be eligible to request to continue to telework one or more days a pay period depending upon the terms of the agency's telework policy.