Skip to main content

This job has expired

ELECTRICAL ENGINEER

Employer
USAJobs
Location
Andrews AFB, Maryland
Closing date
Sep 17, 2021
Duties

Summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

The primary purpose of this position is to serve as a professional electrical engineer, performing design, project programming and construction management/monitoring duties in support of a military installation.
Learn more about this agency

Responsibilities

  • Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of electrical engineering.
  • Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of electrical engineering and (cont)
  • knowledge of other engineering and architecture disciplines to ensure overall compliance with contracted specifications, schedules, etc.
  • Plans, programs, budgets, and executes required projects in support of assigned programs.
  • Performs work in facilities operations and maintenance (O and M) functions.
  • Provides consulting services and project coordination.
  • Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena.
  • Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.


Travel Required

Occasional travel - You may be expected to travel for this position.

Supervisory status
No

Promotion Potential
12

Requirements

Conditions of Employment

  • U.S. Citizenship Required
  • Males must be registered for Selective Service, see www.sss.gov
  • This posn is subject to provisions of the DoD Priority Placement Program
  • Disclosure of Political Appointments
  • TRAVEL AND RELOCATION EXPENSES WILL NOT BE PAID.
  • All federal employees are required to have direct deposit.
  • Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
  • May act as project liaison with the Army Corps of Engineers or other design agencies as required.
  • May be required to serve on A and E selection boards.
  • The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. (cont)
  • The selectee will have up to 24 months to meet the applicable mandatory experience, education, and training requirements.
  • Must be able to obtain and maintain a Secret Clearance.
  • The work require the employee to drive a motor vehicle. An appropriate, valid driver?s license is required for the position.


Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions and the Individual Occupational Requirements (IOR) for the GS-0850 Engineering Series.

BASIC REQUREMENT OR INDIVIDUAL REQUIREMENT: GS-0850: A Bachelor's degree (or higher degree) in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. NOTE: You must submit a copy of transcripts with your application.
OR

COMBINATION OF EDUCATION AND EXPERIENCE: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure, Written Test, Specified Academic Courses, or Related Curriculum.
Click here to view occupational requirements for this position. NOTE: You must submit a copy of transcripts with your application

AND

SPECIALIZED EXPERIENCE: Applicants must meet the basic requirements for the GS-0850-12 and have at least one (1) year of specialized experience to the GS-11 (or higher) grade level or equivalent pay system (may have been obtained in the Federal service, military, or private sector). Specialized experience includes knowledge of electrical engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments. Knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications. Knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings. Knowledge of and familiarity with related fields of work such as architectural, electrical, mechanical, structural, environmental and civil engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations.

FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Professional knowledge of electrical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines.
2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; of environmental principles, practices, procedures, laws, regulations, and current legislative issues; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds.
3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions; and knowledge of program planning and budgeting cycles, financial control and budget systems and management.
4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings; and technique / skill in drafting sufficient to convey design concepts and ideas and formulate working drawings.
5. Ability to plan, conduct and record site/facilities surveys and inspection; to analyze, interpret, and apply results, rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.
6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Additional information

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected at the full performance level and placed at the full performance level. You must include a completed copy of the Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain a copy of the Military Spouse PPP Self-Certification Checklist.

Direct Deposit: All federal employees are required to have direct deposit.

If you are unable to apply online, view the following link for information regarding Alternate Application. The Vacancy ID is 11217319.

If you have questions regarding this announcement and have hearing or speech difficulties click here .

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

BASIS OF RATING:
Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience and education relate to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.

Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements
Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements.
Basically Qualified Group: Candidates in this category meet the minimum education and/or experience requirements.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

For additional information on what to include in your resume, click here .

Applicants who meet the requirements for and apply as a non-competitive eligible that meet minimal qualifications and other requirements of this position, will be given consideration as a non-competitive candidate and will be referred unless blocked by an individual with priority/preference.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Applicants who disqualify themselves will not be evaluated further.

Background checks and security clearance

Security clearance
Secret

Drug test required
No

Required Documents

The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
  • Online Application: Questionnaire
  • Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn ), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.
  • Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
  • Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD-Form 214, which must include the character of service (i.e., with an honorable or general discharge). This will be annotated in block 24 on member copy 2, 4, or 7 of the DD-Form 214. If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces. NOTE: All veterans claiming 10-point preference must also submit a SF-15 .
  • Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action . The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement , block 34 may contain a "1" or "2".
  • Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).
  • ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date. Appointment of military members before the release or discharge date is permissible if the member is on terminal leave. At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD-Form 214, Certificate of Release or Discharge from Active Duty . Active duty members applying for a civil service position without submitting a valid certification memo or DD-Form 214 with their application will render the member ineligible for the position. The certification memo must originate from the member's military service branch on official letterhead and contain the following:
    • Name/Rank/Grade of Service Member
    • Branch of Armed Forces
    • Dates of Active Service (Start and End Date(s)
    • Expected Date of Discharge/Release from Active Duty
    • Terminal leave start date (if applicable)
    • Expected character of service (honorable or general) and type of separation (i.e. separation or retirement)
    • Must be certified within 120 days of anticipated discharge
    • Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
    Note: The VOW Act provides tentative preference. If appointed, a DD Form-214 must be submitted upon receipt.

    OPTIONAL DOCUMENTS:
    Performance Appraisals for Current Federal Civilian Employees
    - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
    Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.
    Note: Applicant must not submit award SF50s-Notification of Personnel Actions (SF50s).

    If you are relying on your education to meet qualification requirements:

    Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .

    Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

    Get job alerts

    Create a job alert and receive personalized job recommendations straight to your inbox.

    Create alert