Duties

Summary

This position is part of The John F Kennedy Center for Performing Arts. The incumbent will serve as an Engineer (Project Manager) in the Project Management Office of the Kennedy Center and is responsible for project management through the lifetime of assigned projects.
Learn more about this agency

Responsibilities

• Manage the efficient and effective coordination and accomplishment of the planning, scoping, design, acquisition, construction, change management, transition, and outfitting of The John F. Kennedy Center for the Performing Arts and REACH expansion.
• Manage project concept, design, construction, and closeout. Each stage of all projects require extensive coordination with other Kennedy Center departments, including Operations and Maintenance, Security, Production, and other building occupants.
• Serve as the Center?s specialist in electrical and mechanical engineering for all projects. Checks operational requirements to assure intent of design is met.
• Develop project schedules, construction cost estimates, ongoing value engineering, and verification of design requirements.
• Direct project activities during construction phase, to include project budget and schedule.
• Develop recommendations for project delivery systems such as Construction Management at Risk, Low-Bid General Contractor, and/or Design Build.
• Assist the Director, Project Management in developing program-wide reports and information.
• Develop and create change management, including analysis of proposed construction change orders, negotiations of prices, and management of changes within budget.

Travel Required

Occasional travel - You may be expected to travel for this position.

Supervisory status
No

Promotion Potential
13

Requirements

Conditions of Employment

• US Citizenship is required.
• Suitable for Federal employment, determined by background investigation.
• Direct Deposit of pay is required.
• Selective Service registration required for male applicants, unless exempt.

Qualifications

In order to be qualified for this position, you must meet the basic requirement AND minimum qualification requirement as noted below:

Basic Requirement:
A. A bachelor's or higher degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. (You must submit licensure or registration for confirmation under this provision.)

2. Written Test -- You must submit evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico under this provision.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

(NOTE: YOU MUST PROVIDE LEGIBLE TRANSCRIPTS SHOWING COMPLETED COURSEWORK AND DEGREE(S) AWARDED AS VERIFICATION OF YOUR EDUCATION).

In addition to meeting the basic eligibility requirements, applicants must have the following specialized experience:

At the GS-13 level, you must meet the following minimum qualification:

One year of specialized experience equivalent to at least the GS-12 level. Specialized experience is that which has equipped the applicant with the competencies to successfully perform the duties of the position, and that is typically in or related to the position to be filled. Specialized experience for this position includes but is not limited to professional engineering work in the design, construction, repair & renovation, restoration, rehabilitation, design or construction of major commercial or industrial facilities (multi-storied or high-rise office bldg. & related structures), managing all, or a large phase, of a major design or construction project.

Only experience and education obtained by the closing date of this announcement will be considered.

TIME-IN-GRADE: Current career or career-conditional employees of the Federal government, or former career or career-conditional employees, who have a break in service of less than one year, are required to meet the time-in-grade restriction of one year of Federal experience at the next lower grade, with few exceptions outlined in 5 CFR 300.603(b).

A written test is not required.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). You will receive credit for all qualifying experience, including volunteer experience.

Education

If qualifying based on EDUCATION you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

Only education from institutions which are accredited or preaccredited/candidate for accreditation may be used to meet education requirements.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

Physical Requirements:

The work is a combination of sedentary and requiring physical effort and exertion such as e.g., walking, standing, carrying items such as manuals or briefcases. Long periods of standing, bending, and stooping is also required to observe and study work operations in project construction areas/sites, confined spaces, mechanical equipment rooms, and other spaces that are noisy, dirty and close quarters, and lifting of light to moderate heavy items weighing less than 15 pounds.

Telework Suitability:

This duties of this position are suitable for core or situational telework, use JFKC guidance during an emergency or natural disaster.

Stipulations of Employment:

Selection may require completion of a 1-year probationary period.

Work Schedule:

This position allows for a flexible work schedule.

Miscellaneous:

KC uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit http://www.uscis.gov/e-verify .

This position is being advertised concurrently with vacancy announcement # KC-21-MP-10996089TG using Merit Promotion procedures. If interested, refer to that announcement to determine if you meet merit promotion requirements and can apply to that announcement. NOTE: You must apply separately to each announcement in order to be considered under both.

This vacancy announcement may be used to fill similar positions within 90 days.

If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application: https://help.usastaffing.gov/Apply/index.php?title=Alternate_Application_Information

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

For Category Rating: Once the application process is complete, qualified candidates will be assigned to a quality category. The category assignment is a measure of the degree in which your background matches the competencies required for this position. The categories for this announcement are defined as: Best-Qualified, Well-Qualified, and Qualified. Your resume and supporting documentation will then be used to determine if you are qualified for this job. If you rate yourself higher than is supported by your application materials, your responses may be adjusted and/or you may be excluded from consideration for this job. If you are found to be among the top candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

• General Engineering
• Oral Communication
• Problem Solving
• Technical Competency - Project Management
• Written Communication

The Category Rating Process does not add veterans' preference points or apply the "rule of three," but protects the rights of veterans by placing them ahead of non-preference eligible within each category. Preference eligibles who meet the minimum qualification requirements and who have a compensable service-connected disability of at least 10 percent must be listed in the highest quality category (except in the case of scientific or professional positions at the GS-09 level or higher).

Background checks and security clearance

Security clearance
Not Required

Drug test required
No

Position sensitivity and risk
Non-sensitive (NS)/Low Risk

Trust determination process
Suitability/Fitness

Required Documents

To apply for this position, you must provide a complete Application Package which includes:

1. Your Resume listing work schedule, hours worked per week, dates of employment mm/yy and duties performed.
2. College transcript(s)
3. Other supporting documents:

• Veterans' Preference documentation, if applicable (e.g. DD-214 Member Copy 4 showing type of discharge/character of service, SF-15 Form and related documentation, VA letter, etc.)
• Career Transition Assistance Program/Interagency Career Transition Assistance Program Documentation: If you are applying under CTAP or ICTAP, you MUST submit proof of eligibility under 5 CFR 330.602(a) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of your most recent performance rating, and a copy of your most recent SF-50 (Notification of Personnel Action) showing your position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP or ICTAP eligible
• Cover Letter, optional

If you are a veteran with preference eligibility and you are claiming veterans' preference, you must submit a copy of your DD-214 or other proof of eligibility. If applicable, you must also submit an SF-15, "Application for 10-Point Veterans' Preference" plus the proof required by that form. Failure to provide this documentation may result in a non preference determination. For more information on veterans' preference (see https://www.opm.gov/policy-data-oversight/veterans-employment-initiative/vet-guide/ ).
Do not submit photographs with your application package. Documents with photographs may not be seen by hiring officials - you must remove your image from any badges, licenses, etc.

Do not upload Adobe portfolio documents. Adobe portfolio documents are not viewable by our agency's staffing offices.

It is your responsibility to ensure all required documents have been submitted prior to the closing date of the announcement.

Career Transition Assistance Programs: These programs apply to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority for this position, you must: 1) meet CTAP or ICTAP eligibility criteria; 2) be rated well-qualified for the position with a score of 85 or above; and 3) submit the appropriate documentation to support your CTAP or ICTAP eligibility. For more information: http://www.opm.gov/rif/employee_guides/career_transition.asp .

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.