Duties

Summary

You will serve as a Mechanical Engineer or Aerospace Engineer in the Propulsion and Power Engineering Department of NAVAIRWARCENAC DIV.
Learn more about this agency

Responsibilities

• You will provide technical support in design engineering products and processes for aircraft turbine engines.
• You will oversee technology transition and the incorporation of technology plans and roadmaps into engine management plans.
• You will evaluate research and development engineering projects in accordance with agency requirements.
• You will execute design, development and qualification programs to introduce improved designs into the fleet and to solve fleet problems.
• You will perform reliability analyses, risk analyses, component improvement and support engine life management programs to ensure fully integrated and affordable engine system readiness.
• You will provide technical direction and advice to the engine integrated program teams at all stages of aircraft turbine engine development and life-cycle phases.
• You will assist in the planning of resources to accomplish major blocks of engineering endeavor for assigned program/project.
• You will serve as a point of contact with in-service engineers, component and performance specialists to provide engineering support and technical effort supervision and management.

Travel Required

Occasional travel - You may be expected to travel for this position.

Supervisory status
No

Promotion Potential
5

Requirements

Conditions of Employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Federal employees applying for GS or STRL DEMO jobs must serve at least one year at next lower grade level or pay band. This requirement is called time-in-grade or time-in-band, and these requirements must be met by closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified in the Engineering Career Field, Level III. Certification is required within 24 months of appointment.

Qualifications

Your resume must demonstrate at least one year of specialized Mechanical Engineering or Aerospace Engineering experience equivalent to the DP-04 STRL Pay Band or equivalent GS-Grade Level (GS-12/13) in the Federal Service. Examples of specialized experience includes: (1) Applying power and propulsion systems engineering working knowledge to provide engineering and technical support in the operation and maintenance of aircraft turbine engines; (2) Providing technical leadership and guidance to competency managers and integrated program team members in support of assigned program initiatives and agency needs; (3) Participating in the design engineering development, testing and analysis of test data, manufacturing development, and production and product support programs to meet the operational specifications for aircraft turbine engines; (4) Developing project planning objectives, including cost, schedule and performance requirements for aircraft turbine engineering projects; and (5) Functioning as a liaison with internal and external contacts to ensure assigned program goals and objectives are met.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

NOTE: YOUR RESUME REFLECTS THAT YOU COMPLETED SUCH EDUCATION AND YOU HAVE SUBMITTED COLLEGE TRANSCRIPT(S) AS EVIDENCE TO SUBSTANTIATE YOUR CLAIM IN COMPLETING SUCH EDUCATION FOR THIS POSITION. ALSO, YOU UNDERSTAND THAT IF YOU DO NOT PROVIDE SUCH INFORMATION, THEN YOU COULD BE RATED AS LACKING EDUCATION REQUIREMENT(S) FOR THIS POSITION.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:

• AEROSPACE ENGINEERING
• ENGINEERING PROJECT MANAGEMENT
• MECHANICAL ENGINEERING
• RESEARCH AND DEVELOPMENT
• RESOURCE MANAGEMENT

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All eligibility, education, qualifications, and time-in-grade/time-in-band requirements must be met by the closing date of this announcement.

Background checks and security clearance

Security clearance
Secret

Drug test required
No

Required Documents

You are required to provide documentation that supports the eligibility and qualification claims made in your resume and assessment questionnaire. You must submit the applicable documents listed here and those listed with the eligibilities you select in the announcement questionnaire with your application package. Applicants who do not provide supporting documentation that fully support their claims will not be referred to the hiring manager. Cover letter is optional.

A complete resume is required. Your resume must show relevant experience, job title, duties and accomplishments. Your resume must show complete information for each job entry to support minimum qualifications. The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week, and pay plan, series and grade level (e.g. DP-0830/0861-05, GS-0830/0861-14/15, etc.) for relevant federal experience.TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume.

Are you applying for a promotion? If you are a current GS employee applying for a higher grade than the grade that you currently hold you must provide an SF-50 that shows that you have held the next lower grade for at least one year. Some SF-50s effective within the last 52 weeks will not demonstrate you have held the next lower grade for at least one year (e.g. General Adjustment SF-50 from this year). In many cases, we need to see two (2) SF-50s to determine time-in-grade and eligibility for promotion. If you are a DoD employee, you can obtain a copy of your SF- 50(s) from MyBiz .

Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials? Check the Conditions of Employment section above to see if any are required. If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package.

Are you using education as a substitute for some or all of the experience requirement? Is there a basic education requirement for this position? Check the Education section above to see what is allowed and what is required. Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school. While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position. You may submit a copy your degree(s) if specific coursework does not have to be verified.

Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference? You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service. If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service. If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too. If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor

Are you a disabled veteran or claiming 10-point veterans' preference?
If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.

You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). http://www.opm.gov/forms/pdf_fill/SF15.pdf .

Are you an active duty service member? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).

Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents contain personal information such as SSN and DOB and some documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove said personal information before you submit your application. You must provide an un-sanitized version of the documents if you are selected.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.