Skip to main content

This job has expired

INTERDISCIPLINARY

Employer
USAJobs
Location
Alexandria, Virginia
Closing date
Dec 3, 2020
Duties

Summary

This position is located in the Department of Defense (DoD), Defense Technology Security Administration (DTSA), Export Control Directorate. As a recognized expert, the incumbent performs professional engineering or scientific work reviewing and developing coordinated DoD recommendations on international transfers of defense-related goods, services, and technologies to ensure they are consistent with U.S. national security interest.
Learn more about this agency

Responsibilities

Incumbent typical work assignments may include the following:
  • Serves as a recognized expert in the design, research, development, test, evaluation, manufacture, and transfer of electronic systems and technologies or sensor systems and technologies (e.g., fire control, range finder, night vision, airborne targeting, airborne reconnaissance, acoustics) requiring the application of professional knowledge of 1) the physical and engineering sciences and mathematics, and 2) the principles, techniques, and practices of electronics or electrical engineering. (Electronics Engineer, GS-0855)
  • Serves as a recognized expert in the design, research, development, test, evaluation, manufacture, and transfer of advanced systems and technologies related to one or more of the following areas: Missiles (e.g., surface-to-surface, surface-to-air, air-to-air, air-to-surface, ballistic, guided, cruise, space launch vehicles); Naval (e.g., surface vessels, submarines, torpedoes); Land ( e.g., tanks, ordnance, armor and anti-armor materials); Chemical ( e.g., energetics, explosives, propellants); or Numerically Controlled Machining requiring the application of professional knowledge of 1) the physical and engineering sciences and mathematics, and 2) the principles, techniques, and practices of mechanical, chemical, systems, or naval engineering. (General Engineer, GS-0801)
  • Serves as a recognized expert in the design, research, development, test, evaluation, manufacture, and transfer of advanced systems and technologies related to chemical/biological agents; detection systems; metal alloys and composites; optical materials; high strength and high temperature materials; nuclear and fissile materials; and obscuration materials and methodologies requiring the application of professional knowledge of 1) the physical and engineering sciences and mathematics, and 2) the principles, techniques, and practices of biology, chemistry, physics, environmental, or material science. (Physical Science. GS-1301)
  • Serves as a recognized expert in the research, development, test, evaluation, manufacture, and transfer of advanced systems and technologies related to aeronautical and aerospace engineering requiring the application of professional knowledge of physical and engineering sciences and mathematics, and 2) the principles, techniques, and practices of aeronautical or aerospace engineering. (Aerospace Engineer, GS-0861)


Travel Required

Occasional travel - You may be expected to travel for this position.

Supervisory status
No

Promotion Potential
15

Requirements

Conditions of Employment

  • U.S. Citizenship is required
  • Males born after 12-31-59 must be registered or exempt from Selective Service (see https://www.sss.gov/Home/Registration)
  • Total salary varies depending on location of position
  • This position is subject to provisions of the WHS/OSD PPP Pilot Program
  • May be required to successfully complete a probationary/trial period
  • Must be determined suitable for federal employment
  • Required to participate in the direct deposit program
  • This position is subject to pre-employment and random drug testing
  • Must be able to obtain and maintain a Top Secret SCI security clearance
  • Temporary travel to both CONUS and OCONUS locations may be required up to 20% of the time


Qualifications

For qualifications determinations your resume must contain hours worked per week and the dates of employment for each position listed on your resume (i.e., hours per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application will be marked as incomplete and you will not receive consideration for this position. about what should I include in my federal resume? at USAJOBS. https://www.usajobs.gov/Help/faq/application/documents/resume/what-to-leave-out/

There is an Individual Occupational Requirement (IOR) for the GS-0801, 0855 and 0861, Professional Engineering Series
which requires you to possess:

1. Basic Requirements:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelors degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcript(s)). OR

B. Combination of college-level education, training and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background was obtained by a Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineers in Training (EIT), or licensure as a Professional Engineer (E) by any State, the District of Columbia, Guam, or Puerto Rico. OR

C. Combination of college-level education, training and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background was obtained by a Written Test - Evidence of having successfully passing the Fundamentals of Engineering (FE) examination or any other written test required for a professional registration by an engineer licensure board in the various States, District of Columbia, Guam, and Puerto Rico. OR

D. Combination of college-level education, training and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background was obtained by successful completion of 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under item A above. OR

E. Combination of college-level education, training and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background was obtained by successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the you have had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

There is an Individual Occupational Requirement (IOR) for the 1301 General Physical Science Series, which requires you to possess:

1. Basic Requirements:

A. Degree. Physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics. OR

B. Combination of college level education and experience; education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. AND

In addition to meeting the basic education requirement for series 0801, 0855, 0861 and/or 1501 you must meet:

2. Specialized Experience:

You may qualify at the GS-14 level, if you fulfill the following qualification requirement for either General/Electrical/Aerospace Engineer or Physical Scientist:
One full year of specialized experience equivalent to the GS-13 grade level in the Federal government or equivalent in: Significantly altering standard practices, equipment devices, processes and techniques; executing projects representing an important segment of the agency's operating programs and/or methods. OR

One full year of specialized experience equivalent to the GS-13 grade level in the Federal government or equivalent in: Applying experimental theories and/or new applications or developments to extend or modify theories, concepts, and assumptions; significantly altering standard practices, equipment, devices, processes, and known techniques; providing expert advice to senior colleagues and/or agency officials responsible for broad program operations.

You may qualify at the GS-15 level, if you fulfill the following qualification requirement for either General/Electrical/Aerospace Engineer or Physical Scientist:
One full year of specialized experience equivalent to the GS-14 grade level in the Federal government or equivalent in: Providing engineering and scientific analyses and recommendations in area(s) of expertise; applying expert knowledge in the design, research, development, test, evaluation, and/or manufacturing of at least one of the following areas: sensor systems and technologies; missiles, Naval (e.g., submarines, torpedoes), Land (e.g., tanks, ordnance), Chemical (e.g., explosives, propellants); or aeronautical/aerospace engineering (e.g., aircraft, unmanned air vehicles, propulsion systems). OR

One full year of specialized experience equivalent to the GS-14 grade level in the Federal government or equivalent performing duties in: Applying expert knowledge in the design, research, development, testing, evaluation, and/or manufacturing of advanced systems and technologies related to chemical/biological agents.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

All qualifications, education, and time-in-grade requirements must be met by the closing date of this announcement and clearly documented in your resume.

Education

ARE YOU USING YOUR EDUCATION TO QUALIFY? You MUST provide transcripts to support your educational claims. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

PASS/FAIL COURSES: If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

ARE YOU QUALIFYING BASED ON EDUCATION or A COMBINATION OF EDUCATION AND EXPERIENCE?
You must provide sufficient documentation of your education in your resume. You are strongly encouraged to provide a copy of transcripts or degrees in your application package. It is also acceptable to document your applicable course listing in your resume (course number, credits earned, etc.). Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation at the following website: http://www.ed.gov/admins/finaid/accred/index.html . All education claimed by applicants will be verified by the appointing agency. If selected, an official/sealed transcript will be required prior to appointment.

Additional information

PPP PILOT: The Washington Headquarters Service is currently operating under an approved reengineered Priority Placement Program (PPP) pilot for all positions in its serviced workforce. This pilot is application based and current PPP registrants who are registered for activity codes 293A and 295A (regardless of the location) are required to apply to the job announcement via USAJobs in order to exercise their priority placement status. This pilot permits priority candidates to be assessed with other competitive applicants. Anyone claiming priority status must provide a copy of their PPP registration and supporting documentation (e.g. RIF notice, Certification of Expected Separation) at the time of application to verify priority placement and eligibility.

MILITARY SPOUSE PREFERENCE: Military spouse preference applicants are required to apply to job announcement via USAJobs in order to exercise their preference status. The application must include the Military Spouse PPP Self-Certification Checklist, Marriage Certificate or License, Sponsor's PCS orders at the time of application to be considered. MSP applicants will receive priority consideration at the FPL, and if selected, will be placed at the FPL.

Other priority consideration programs will continue under their current operating procedures.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

If you are unable to apply online, you must request an alternative application. Please view the following link for information on how to obtain an alternative application https://help.usastaffing.gov/Apply/index.php?%20title=Alternate_Application_Information

Appointment Authorities: For more information on appointment authority eligibility requirements:
  • https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/individuals-with-disabilities/
  • https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/veterans/
  • https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/military-spouses/
  • Other Special Appointment Authorities https://www.usajobs.gov/
  • Interchange Agreements https://www.opm.gov/policy-data-oversight/hiring-information/competitive-hiring/#url=Types-of-Appointments
Career Transition Assistance Programs: These programs apply to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority for this position, you must: (1) meet CTAP or ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 85 or above; and, (3) submit the appropriate documentation to support your CTAP or ICTAP eligibility. For more information visit: https://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. http://www.esd.whs.mil/DD/DoD-Issuances/140025/

Nepotism: Under the provisions of 5 USC 3110, an individual may not be appointed into a position if the position is under the supervisory chain of command of a relative.

Additional vacancies may be filled by this announcement.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your résumé and supporting documentation will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

All qualified candidates will be assigned to a quality category. The category assignment is a measure of the degree in which your background matches the competencies required for this position. Your qualifications will be evaluated based on your responses to the assessment questionnaire. The assessment questionnaire link can be found under the 'How To Apply' section.

  • Attention to Detail
  • Data Analysis
  • Electronics Engineering
  • Research
  • Test and Evaluation


ACTIVE DUTY SERVICE MEMBERS: The VOW Act Chapter 21 of Title 5, United States Code (U.S.C.), Section 2108a, requires Federal agencies treat active duty service member as veterans, disabled veterans, and preference eligible, when they submit, at the time they apply for a Federal job, a "certification" of active service in lieu of a DD-214, assuming the service member is otherwise eligible. A "certification" letter should be on letterhead of the appropriate military branch of the service and contain (1) the military service dates including the expected discharge or release date; and (2) the character of service. The service member's military service dates are necessary in order to determine whether he or she meets the definition of "veteran" under 5 U.S.C. 2108(1). The "certification" must reflect the service member is expected to be discharged or released from active duty service in the armed forces under honorable conditions not later than 120 days after the date of submission. The "certification" must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin (if applicable), your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Further, under paragraph (h) of the rule, agencies are required to verify a qualifying separation from military service prior to appointment, through the DD-214 or other appropriate documentation. Your preference and/or appointment eligibility will be verified prior to appointment. Active duty members that fail to provide a valid "certification" of service with their initial application will be found "not eligible." Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.

Background checks and security clearance

Security clearance
Sensitive Compartmented Information

Drug test required
Yes

Position sensitivity and risk
Special-Sensitive (SS)/High Risk

Trust determination process
National security

Required Documents

YOU ARE REQUIRED TO DOCUMENT IN YOUR APPLICATION PACKAGE EVIDENCE THAT SUPPORTS YOUR ELIGIBILITY AND QUALIFICATION CLAIMS. You MUST upload the applicable documents with your application package. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.

1. Your resume may be submitted in any format that includes your name and contact information (telephone number and/or email).
If you submit more than one copy of your resume, only the most recent version will be reviewed. The latest timestamp will be used to determine which version of your resume is "most recent."

If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you will not be considered for this vacancy.

Are you applying for a promotion? If you are a current or former Federal Civilian employee and applying for a higher grade than the grade that you currently or formerly held within the last 52 weeks, you are required to provide an SF-50 that shows that you have held the next lower grade for at least one year. Some SF-50s effective within the last 52 weeks will not demonstrate you have held the next lower grade for at least one year (e.g. General Adjustment SF-50 from this year). In many cases, you are required to provide two (2) SF-50s to determine you meet the one year time-in-grade requirement and eligibility for promotion. Examples of appropriate SF-50s include Promotions, Within-Grade Increase (WGI), etc.

2. Other supporting documents:
  • Cover Letter, optional
  • Most recent SF-50, "Notification of Personnel Action" showing you are/were in the competitive service and the highest grade held (WHS serviced employees SF-50s will be verified via eOPF).
  • College Transcript(s), if qualifying based on education (WHS serviced employees will be verified via eOPF or you may include them in your application package. However, it is the employee's responsibility to ensure that his/her eOPF contains the required transcript and is up-to-date).
  • DD-214, SF-15 Form and VA letter, or certification of expected discharge or release from active duty from Veterans for consideration under Veteran hiring authorities
  • Noncompetitive appointment authority documentation, if applicable
  • Career Transition Assistance Program/Interagency Career Transition Assistance Program documentation, if applicable (e.g., Certification of Expected Separation, Reduction-In-Force Separation Notice, or Notice of Proposed Removal; SF-50 that documents the RIF separation action; and most recent performance appraisal.)
  • PPP Registrants/Eligibles: Must submit the following applicable documents: 1) PPP registration 2) PCS orders (if applicable)
DOES THIS POSITION REQUIRE A LICENSE OR CERTIFICATE?
You are strongly encouraged to provide a copy of your license or certificate in your application package. It is also acceptable to document your license number and the name of the licensing authority in your resume.

ARE YOU A VETERAN CLAIMING SOLE SURVIVORSHIP PREFERENCE OR 5-POINT VETERANS' PREFERENCE?
1. You must provide legible copy/copies of the following: DD-214, "Certificate of Release or Discharge from Active Duty," showing all dates of service, type of discharge as well as character of service (Honorable, General, etc.) or Statement of Service/Proof of Service (in lieu of a DD-214) from your command or local Personnel Support Detachment (PSD). The Statement of Service/Proof of Service must provide all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.). Veterans should upload their DD-214 once they receive it upon separation.
2. You should also document your complete military service information in the Veterans Preference and Military Service Section of the assessment questionnaire (type of preference, dates of service, date of VA letter, character of service, disability claim and rank and date of retirement if retired).

ARE YOU A DISABLED VETERAN or CLAIMING 10-POINT VETERANS' PREFERENCE?
1. Disabled veterans, veterans, widows, spouses or the mother of a veteran, who are eligible for 10-point veterans' preference, you must provide legible copies of the following: Applicable supporting documents as noted on Standard Form-15 (SF-15). To obtain a copy of SF-15, go to: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/veterans/

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Get job alerts

Create a job alert and receive personalized job recommendations straight to your inbox.

Create alert