Duties

Summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

The primary purpose of this position is to broaden the skills and/or enhance the leadership of an identified, high-potential, mid-leave manager/executive.
Learn more about this agency

Responsibilities

1. Performs Career Broadening assignments involving initiating and developing Air Force policy and recommends approval and implementations.
2. Represents the U.S. Department of Defense, Air Force, SAF/AQ, and Directorate as appropriate.
3. Determines requirements to be satisfied by planning, analyzing and interpreting results of technical evaluations, where precedents are not directly applicable.
4. Independently carries out special projects and assignments designed specifically to meet the broadening intent of the position.

Travel Required

Occasional travel - You may be expected to travel for this position.

Supervisory status
No

Promotion Potential
4

Requirements

Conditions of Employment

• U.S. Citizenship is required
• Mobility agreement must be signed
• Must be able to obtain and maintain the appropriate security clearance
• PCS travel expenses will be paid IAW JTR and AFMAN 36-606
• Career Broadening positions are managed by AFPC/DP2Z and are centrally funded.
• Positions are established specifically to provide developmental experience designed to broaden the skills and/or enhance the leadership perspective of a high-potential, mid-level manager.
• Career Broadening also provides training and developmental opportunities at various organizational levels.
• These assignments offer the qualified candidate a unique assignment in that the candidates brings certain experience to the assignment while gaining new experiences in a different work environment
• TEMPORARY PROMOTION: If the position is filled as a temporary promotion, upon completion of the career broadening assignment, the temporary promotion may lead to permanent promotion without further competition
• Position may be subject to random drug testing
• Travel by regularly scheduled commercial or military conveyances IAW Joint Travel Regulations may be required in performance of TDY
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Shift work and emergency overtime may be required
• Employee must maintain current certifications

Qualifications

QUALIFICATIONS: In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions.

BASIC REQUIREMENT:A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

SPECIALIZED EXPERIENCE: One year of specialized experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to successfully perform the duties of the position, and that is typically in or related to the position to be filled. To be creditable, the specialized experience must have been at the GS-13 grade level or equivalent under other pay systems in the Federal service.

FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Applicants must have served at least 52 weeks at the GS-13 or higher grade (or equivalent in an alternate pay system) within the Federal Civil Service to be considered for referral. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Demonstrated knowledge of development planning, technology maturity assessments, life cycle systems engineering and integration, and the technological foundations for effective development of program technical assessment strategies.
2. Ability to work with customers to assess needs, provide assistance, resolve problems, and satisfy expectations.
3. Ability to persuade others to accept recommendations, works toward an agreement, and negotiate mutually acceptable solutions.
4. Ability to develop and maintain effective relationships and to communicate effectively, both orally and in writing.
5. Ability to organize work, set priorities, and determines resource requirements; determine goals and strategies to achieve them; coordinate with other organizations or parts of the organization; monitor progress, and evaluate outcomes.
6. Ability to identify problems and use sound judgment and decisions to generate and evaluate alternatives and make recommendations.
7. Ability to develop and utilize appropriate data collection techniques
8. Demonstrated knowledge of the DoD and Air Force acquisition processes.
9. Ability to estimate technical scope to include cost and schedule.
10. Demonstrated ability in technical or engineering environments.
11. Graduate level education in systems engineering, cost analysis, technical planning and assessment or related areas and a master's degree in a technical/engineering specialty or equivalent experience in high tech product development and life cycle management is preferred

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Additional information

PCS restrictions: An employee selected to make a PCS to a Career Broadening assignment is restricted from making a second PCS for 12 months

Defense National Relocation Program is Authorized

Direct Deposit: All federal employees are required to have direct deposit.

Incentives: Recruitment and/or retention incentives may be used.

Employee must be able to obtain and maintain a Top Secrect w/SCI clearance.

May be required to travel by military or commercial aircraft in the performance of TDY assignments.

May be required to work overtime on an unscheduled or emergency basis.

This position has been designated as an acquisition position and is covered by the Acquisition Professional Development
Program (APDP). The employee must meet, or be capable of meeting Defense Acquisition Workforce Improvement Act (DAWIA)
certification requirements applicable to the career category designated on the position description within 24 months of assignment.
This position also requires the employee to engage in acquisition continuous learning activities achieving 80 Continuous Learning
points every 24 months.

This position has been designated as a Testing Designated Position (TDP) under the Air Force civilian Drug Testing Program.
Illegal drug use by employees in sensitive positions present a clear threat to the mission of the Air Force, national security, and
public safety. It is required that you (a) refrain from the use of illegal drugs and (b) if requested, submit to urinalysis testing.

Employee must within 30-days of assuming this position and by 31 October annually thereafter, file an OGE-450, "Confidential
Financial Disclosure Report." Employee is required to attend annual ethics and procurement integrity training.

If you have questions regarding this announcement and have hearing or speech difficulties click here .

Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017 suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. The law made taxable certain reimbursements and other payments, including driving mileage, airfare and lodging expenses, en-route travel to the new duty station, and temporary storage of those items. The Federal Travel Regulation Bulletin (FTR) 18-05 issued by General Services Administration (GSA) has authorized agencies to use the Withholding Tax Allowance (WTA) and Relocation Income Tax Allowance (RITA) to pay for "substantially all" of the increased tax liability resulting from the "2018 Tax Cuts and Jobs Act" for certain eligible individuals. For additional information on WTA/RITA allowances and eligibilities, please visit: https://www.gsa.gov/cdnstatic/FTR%20Bulletin%2018_05%20Relocation%20Allowances_0.pdf

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

Your responses to the questionnaire may be compared to the documents you submit. The documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

Applicants who meet the requirements for and apply as a non-competitive eligible that meet minimal qualifications and other requirements of this position, will be given consideration as a non-competitive candidate and will be referred unless blocked by an individual with priority/preference.

Applicants who disqualify themselves will not be evaluated further.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Background checks and security clearance

Security clearance
Top Secret

Drug test required
Yes

Position sensitivity and risk
Special-Sensitive (SS)/High Risk

Trust determination process

Required Documents

The following documents are required and must be provided with your application for this Public Notice:

The following documents are required and must be provided with your application. Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration. Other documents may be required based on the eligibility/eligibilities you are claiming. Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.

Online Application: Questionnaire

Resume: For qualification determinations your resume must contain hours worked per week (if part-time) and dates of employment (i.e., month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as insufficient and you will not receive consideration for this position. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade, i.e. GS-0301-09. Current Federal Civilian Employees should list any relevant performance related rating (given within the last three years) and/or incentive awards in your resume. Do NOT include photographs (or links to social media such as LinkedIn ), inappropriate material, inappropriate content, nor personal information such as age, gender, religion, social security number, etc., on your resume.

Current or Former Federal Civilian Employees (includes current Air Force employees): You must submit a legible copy of a SF-50, Notification of Personnel Action . The SF-50, block 24 must contain "1" or "2" AND block 34 must be a "1". Employees eligible under an OPM approved interchange agreement , block 34 may contain a "1" or "2".

Promotion Consideration: If you wish to be considered as a promotion candidate and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one-year time-in-grade requirements. You will need to provide additional SF-50s which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-Grade, Grade/Range Increases, and SF-50s with an effective date more than one year old).

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.