Duties

Summary

See below for important information regarding this job.

Learn more about this agency

Responsibilities

• Serves as a General Engineer, DLA Installation Management Energy, with responsibility for managing, coordinating, reviewing, and providing guidance on assigned DoD Fuels Real Property Maintenance (RPM) and Military Construction (MILCON) Programs.
• Advise the DS Site Director, Chief of Engineering, Program Management Office Chief, Regional Facility Managers, Design/ Construction Agents, and Architect/ Engineering contractors about facilities engineering actions for RPM and MILCON projects.
• Represents DLA in negotiations with requesting activities, D/C agents, A/E firms, and Regional/ Service offices on DLA-funded projects and reviews and makes recommendations on all plans, specifications, and cost estimates.
• Coordinates with state and local civilian authorities and regulatory personnel on intra-governmental matters
• Inspects and validates construction projects completed to determine adequacy of installation and conformance to plans and specifications.
• Maintains close liaison with U.S. Government and private Professional Engineers, Architects, industry representatives, and other petroleum personnel in order to keep abreast of the latest developments within the industry.

Travel Required

Not required

Supervisory status
No

Promotion Potential
12

Requirements

Conditions of Employment

• Must be a U.S. citizen
• Tour of Duty: Flexible
• Security Requirements: Non-Critical Sensitive with Secret Access
• Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
• Fair Labor Standards Act (FLSA): Exempt
• Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
• Recruitment Incentives: Authorized
• Bargaining Unit Status: No
• Pre-Employment Physical: Not Required

Qualifications

To qualify for a General Engineer, your resume and supporting documentation must support:
A. Basic Requirement: A Bachelor's Degree or higher in professional engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
a. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
b. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
c. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
d. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant3has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
AND
B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to successfully perform the duties of the position, and that is typically in or related to the position to be filled. To qualify at the GS-12 level, applicants must possess one year of specialized experience equivalent to the GS-11 level or equivalent under other pay systems in the Federal service, military or private sector. Creditable specialized experience includes:

• Providing overall technical engineering guidance for assigned projects.?
• Inspecting and validating construction projects completed to determine adequacy of installation and conformance to plans and specifications.
• Assisting as a technical liaison between facilities management, consultants, other internal personnel as well as regulatory agencies to ensure that appropriate engineering solutions are programmed, designed, and executed for organizational fuel facilities.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

Substitution of education may not be used in lieu of specialized experience for this grade level.

Additional information

For Important General Applicant Information and Definitions go to: http://www.dla.mil/portals/104/documents/careers/GenAppInfoDef.pdf

Reemployed Annuitants: This position does not meet criteria for appointment of Reemployed Annuitants. The DoD criteria for hiring Reemployed Annuitants can be found at: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/1400.25-V300.pdf

If you are an eligible Interagency Career Transition Assistance Program (ICTAP) applicant you may apply for special selection over other candidates for this position. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated at a score of 85 or higher for this position. ICTAP eligibles must submit one of the following as proof of eligibility for the special selection priority: a separation notice; a "Notice of Personnel Action" (SF-50) documenting separation; an agency certification that you cannot be placed after injury compensation has been terminated; an OPM notification that your disability annuity has been terminated; OR a Military Department or National Guard Bureau notification that you are retired under 5 U.S.C. 8337(h) or 8456. Additional information may also be found at the General Information and Definitions link above..

INFORMATION FOR VETERANS is available at: http://www.dla.mil/Careers/Programs/veterans.aspx . As of 23 December 2016, Military retirees seeking to enter federal service in the Department of Defense now require a waiver if they would be appointed within 180 days following their official date of retirement.

DRUG-FREE WORKPLACE: The Defense Logistics Agency (DLA) has established a Drug-Free Federal Workplace Policy. All applicants tentatively selected for DLA employment in a testing designated position are subject to urinalysis to screen for illegal drug use prior to appointment. Applicants who refuse to be tested will be denied employment with DLA for a period of six months. This policy extends to random testing for the use of illegal drugs by employees who occupy testing designated positions defined as sensitive in Section 7(d) of Executive Order 12564. The Defense Logistics Agency's Drug Free Workplace Plan's drug testing panel includes testing for the following illegal substances: marijuana, cocaine, opiates (codeine/morphine), 6-Acetylmorphine (heroin), phencyclidine, amphetamines (amphetamine/methamphetamine), methylenedioxymethamphetamine (MDMA), methylenedioxyamphetamine (MDA), oxycodone, oxymorphone, hydrocodone, and hydromorphone.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

The assessments for this job will measure the following Competencies:

• Engineering Project Management
• Fuels & Military Construction Engineering
• Communication

Direct Hire Evaluation: Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. This vacancy will be filled through OPM's Direct Hire Authority. All applicants who meet the basic qualification requirements will be forwarded to the Selecting Official for consideration. The rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to this vacancy. We will evaluate your application for basic eligibility and to determine if your experience meets the basic qualification requirements described in the announcement. All applicants who meet the qualifications and other basic requirement are eligible for referral and selection consideration. Please follow all instructions carefully. Errors or omissions may affect your rating.

Veteran's Preference: If you are entitled to veteran's preference, you should indicate the type of veteran's preference you are claiming on your résumé. Your veteran's preference entitlement will be verified by the employing agency. If you are entitled to veteran's preference and qualified for the position, your name will be placed above non-preference candidates on a list sent to the hiring manager for employment consideration. Qualified veterans' preference eligibles with a service-connected disability of 10% or more will be listed at the top of the highest quality category depending on the position and grade level of the job. For information on entitlement see http://www.fedshirevets.gov/job/vetpref/index.aspx .

All Veterans: You are required to submit a DD Form 214, Military Discharge (Member Copy 4). Veterans claiming 10 Point Preference in addition to your DD 214, you are required to submit a completed SF-15 and, supporting documents outlined on the SF-15. http://www.opm.gov/forms/pdf_fill/SF15.pdf

Background checks and security clearance

Security clearance
Secret

Drug test required
Yes

Required Documents

To apply for this position you must provide a complete Application Package. Each Application Package MUST include:

Your Resume listing work schedule, hours worked per week, dates of employment and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for the qualifications and referred for selection consideration if eligible.

Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents .

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.