Duties

Summary

You will serve as a Engineering Technician in the Fluids Functional Lab Group, Technical Support Department, Division of Engineering and Weapons of NAVACADEMY.

PAY FOR THE GS 09: $57510 TO $74759
PAY FOR THE GS 10: $63332 TO $82326
Learn more about this agency

Responsibilities

• You will design devices used to test and measure lab experiments in the field of aerospace fluid mechanics.
• You will set up electrical and mechanical equipment to support aerospace laboratory simulations and exercises.
• You will instruct others on the use of fluid mechanics laboratory equipment.
• You will Lead or guide others to accomplish work.
• You will use data acquisition systems and laboratory instrumentation (e.g., oscilloscopes, power meters, laboratory test facilities) to complete require tests.
• You will advise others of the capability and limitations of computer numerical controlled (CNC) tools.

Travel Required

Not required

Supervisory status
No

Promotion Potential
11

Requirements

Conditions of Employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• This is a bargaining unit position.
• You will be required to complete training, obtain, and maintain a government credit card with travel and purchase authority.

Qualifications

For the GS-10 vacancy: Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-09 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Designing, instructing and demonstrating in a laboratory setting the devices used in the field of Fluid Mechanics and Aerospace Technologies (to include using wind tunnels and super-sonic wind tunnels in a laboratory setting); 2) Providing consultation and advice on emerging and cutting edge technologies for Fluid Mechanics using research techniques; 3) Using a variety of manual and CNC controlled machines along with lathes, drill presses, bending and other fabrication tools; 4) Translating and utilizing Computer Aided Design (CAD) and Manufacturer's Drawings in the design and fabrication of naval engineering projects in a controlled environment; 5) Instructing Midshipmen and other authorized personnel via classroom and/or laboratory in the proper techniques and principles utilized in naval engineering facilities for Fluid Mechanics and Aerospace Technology. NOTE: This information must be supported by your resume in order to be considered for the position.

For the GS-09 vacancy: Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-08 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Assisting with designing, instructing and demonstrating in a laboratory setting the devices used in the field of Fluid Mechanics (to include using wind tunnels and super-sonic wind tunnels in a laboratory setting); 2) Assist with providing consultation and advice on emerging and cutting edge technologies for Fluid Mechanics and Aerospace Technologies using research techniques; 3) Using a variety of manual and CNC controlled machines along with lathes, drill presses, bending and other fabrication tools; 4) Translating and utilizing Computer Aided Design (CAD) and Manufacturer's Drawings in the design and fabrication of naval engineering projects in a controlled environment; 5) Assist with instructing Midshipmen and other authorized personnel via classroom and/or laboratory in the proper techniques and principles utilized in naval engineering facilities for Fluid Mechanics and Aerospace Technology. NOTE: This information must be supported by your resume in order to be considered for the position.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-TECH.

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/engineering-technical-series-0802/

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess
Examples of qualifying specialized experience include technical work in: drafting, surveying construction estimating, physical science, mathematics, aerospace, architecture, chemicals, electrical or mechanical systems, mining, petroleum, or nuclear systems.

Experience in a trade or craft may be credited as specialized experience when the work provided intensive knowledge of engineering principles, techniques, methods, and precedents. Examples are trade positions with substantial developmental, test, or design responsibilities such as:

• Planner and estimator who analyzed designs for production purposes.
• Instrument maker or model maker who performed design or development work on devices fabricated.

Successful completion of a full 4-year course of study leading to a bachelor's degree (a) with major study in an appropriate field of engineering, construction, or industrial technology; or (b) that included at least 24 semester hours in any combination of courses such as those shown above for GS-3 (or equivalent). At least 6 of the 24 semester hours must have been in drafting if the position has been designated by a drafting area of specialization.

Certification:

Engineering technicians may be certified by the National Institute for Certification in Engineering Technologies, an organization sponsored by the National Society of Professional Engineers. Certification by the Institute will be helpful as a measure of the technician's quality of experience.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating of 85 or higher. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/

Vacancies filled from this announcement may be filled at any grade level listed.

If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.

Full performance level is GS-11, which is not being recruited for, nor filled, with this vacancy announcement.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:

• AEROSPACE
• COMPUTER LITERACY
• DEVELOPING OTHERS

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All qualifications requirements must be met by the closing date of this announcement.

Background checks and security clearance

Security clearance
Not Required

Drug test required
No

Required Documents

A COMPLETE RESUME IS REQUIRED. Your resume must show relevant experience (cover letter optional) where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (Mo/Yr), hours per week & salary. If you are a current Federal employee or previous Federal employee, provide your pay plan, series and grade level i.e. GS-0201-09. Note: Only the last resume received will be reviewed.

YOU ARE REQUIRED TO DOCUMENT IN YOUR APPLICATION PACKAGE EVIDENCE THAT SUPPORTS YOUR ELIGIBILITY AND QUALIFICATION CLAIMS. You are strongly encouraged to upload the applicable documents with your application package. These documents will assist the staffing specialist in determining your eligibility and qualifications, but are not required at the time of application. If you do not upload the suggested documents, then you must document in your resume the information needed to determine your eligibility. If you are selected, these documents will be requested at the time of tentative job offer to verify eligibility and qualifications.

DOES THIS POSITION REQUIRE A LICENSE OR CERTIFICATE? You are strongly encouraged to provide a copy of your license or certificate in your application package. It is also acceptable to document your license number and the name of the licensing authority in your resume.

ARE YOU QUALIFYING BASED ON EDUCATION or A COMBINATION OF EDUCATION AND EXPERIENCE? You must provide sufficient documentation of your education in your resume. You are strongly encouraged to provide a copy of transcripts or degrees in your application package. It is also acceptable to document your applicable course listing in your resume (course number, credits earned, etc...). You may submit a copy of your degree(s) if specific coursework does not have to be verified. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation at the following website: http://www.ed.gov/admins/finaid/accred/index.html . All education claimed by applicants will be verified by the appointing agency accordingly. If selected, an official/sealed transcript will be required prior to appointment.

ARE YOU AN ACTIVE DUTY SERVICE MEMBER? Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command. The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).

Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents contain personal information such as SSN and DOB and some documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove said personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.