TRAVEL REQUIRED:

Not required

RELOCATION AUTHORIZED:
Relocation expenses reimbursed No

KEY REQUIREMENTS:
Help

Must be a US Citizen.

Must be determined suitable for federal employment.

Must participate in the direct deposit pay program.

New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.

Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.

You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.

This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field Facilities Engineering Level III. Certification is required within 24 months of appointment.

You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.

This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

For the GS-0850-13 Level only, this position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: the position requires a current license as a Professional Engineer (PE) registered in the District of Columbia, Guam, Puerto Rico, or any State in the U.S. You must submit a copy of your license with your application.For the GS-0850-12 Level, registration as a Professional Engineer is desirable but not required.

For the GS-0830-13 In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Applying advanced knowledge of mechancial engineering principles, concepts, theories, and practices to provide services associated with mechanical engineering building design and controls; 2) Advanced experience reviewing technical documents used in the planning, design, construction, alteration and/or repair of facilities in order to provide technical advice in project building design and construction; 3) Managing difficult and challenging facilities designs for a full range of building mechanical engineering systems and building sizes. NOTE: This information must be supported in your resume to be considered for the position.


For the GS-0830-12: In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Analyzing and designing mechanical systems and controls for facilities; 2) Preparing design documents for construction (e.g., outlines of engineering services, scopes of work, AutoCAD design construction documents, facilities specifications, and construction cost estimates, and Architect-Engineer (A&E) fee estimates) and 3) Reviewing work performed under Architect-Engineer (A&E) contracts including calculations, cost estimates, project documents, reports, and facility designs for compliance with facilities engineering criteria/policy/codes, technical adequacy and sound engineering practice. NOTE: This information must be supported in your resume to be considered for the position.


Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROFhttps://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0830/ and
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

YOU MUST SUBMIT A COMPLETE COPY OF YOUR TRANSCRIPTS OR AN ITEMIZED LIST OF COLLEGE COURSES WHICH INCLUDES EQUIVALENT INFORMATION FROM THE TRANSCRIPT (course title, semester/quarter hours, and grade/degree earned); OR PROOF OF LICENSES AND REGISTRATIONS; OR EXAMINATION RESULTS.

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

Occasional overtime is required but is not guaranteed on a regular basis.

Recruitment incentives may be authorized to eligible new hires.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

This position is eligible for part time, full time or ad-hoc telework at the discretion of management.

Term appointments may be extended up to 8 years at the discretion of management and in accordance with applicable regulations. Additionally, you may be noncompetitively converted to a permanent career-conditional or career appointment under specific conditions.

Vacancies filled from this announcement may be filled at any grade level listed.

If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.

A forty hour work week is typical for this position.

Occassional physical activity is required including walking, climbing, or bending in the performance of field work, for designs and during field inspections of existing and/or new facilities during design and construction.

Work is performed primarily in an office setting. There are occasional factory visits, and exposures to conditions in buildings and facilities that are under construction.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate for this vacancy, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category or higher. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/ictap/

Read more

You will be evaluated for this job based on how well you meet the qualifications above.

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and responses to the Occupational Questionnaire, along with your supporting documentation to determine your ability to demonstrate the following competencies:

• DESIGN AND DEVELOPMENT
• HVAC/ REFRIGERATION
• MECHANICAL ENGINEERING
• PETROLEUM/OILS/LUBRICANTS
• TECHNICAL ASSESSMENT

You will be evaluated and rated under Category Rating selection procedures. Additional points are not added for veterans' preference; however, preference is still applied. Applicants eligible for veteran's preference will receive selection priority over non-veterans.

If you meet the qualification requirements, your application will be placed in one of three categories:

Best Qualified- Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for announced position.
Highly Qualified-Candidates in this category possess good skills and experience above the minimum requirements for announced position.
Qualified- Candidates in this category meet the minimum experience requirements for announced position.

If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All qualifications requirements must be met by the closing date of this announcement.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Read more Security clearance Secret

Drug test required No