Interdisciplinary (Architect/Engineer) Recent Graduate
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed Yes You may qualify for reimbursement of relocation expenses in accordance with agency policy.
- Recent graduates who have completed, within the previous two years, a qualifying associates, bachelors, masters, professional, doctorate, vocational or technical degree or certificate from a qualifying educational institution. Short-term training programs (e.g. several two-week programs completed) are not considered an academic course of study.
- Current students who will graduate no later than June 30, 2019
- Preference eligible veterans who were precluded from applying due to their military service obligation begin their two-year eligibility period upon release or discharge from active duty. Eligibility for these veterans cannot exceed six years after degree or certificate completion
After Program completion, Department of the Army Recent Graduates MAY be converted to a permanent position or to a term position (a project-based term of employment lasting between one and four years).
To be eligible for conversion to a permanent or term position, Recent Graduates must:
- Be a U.S. Citizen
- Successfully complete all the requirements of the Recent Graduate Program as defined in the Agency Participant Agreement.
- Demonstrate successful job performance.
- Meet the Office of Personnel Management qualification standard including any applicable positive education requirements and/or selection placement factors and any other designated special qualifications requirements and conditions of employment (e.g. medical standards) appropriate for the position to which being converted.
To learn more, please visit the Office of Personnel Management webpage, Hiring Authorities: Students & Recent Graduates.
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirements (Must be met by June 30, 2019)
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Basic Requirement for Architect:
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below in "Education" Section.
You will be evaluated on the basis of your level of competency in the following areas:
- Grade Point Average
- Manages and Organizes Information
- Technical Competence
Qualification Requirements (Education Qualifications below must be met by June 30, 2019)
GS-5: Applicants who meet one of the basic requirements described above are fully qualified.
- One year of specialized experience which includes 1) Applying architecture/engineering laws, regulations, and policies to projects; OR 2) Calculating mathematical solutions using engineering or architectural formulas. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR
- One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Architectural Degree; OR
- Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). OR
- Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
- Specialized Experience: One year of specialized experience which includes 1) Creating Plans and specifications for engineering or construction projects and 2)Utilizing specialized computer software or applications to make engineering/architectural calculations. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR
- Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Architecture, Civil/Electrical/Mechanical Engineering. OR
- Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.
- Specialized Experience: One year of specialized experience which includes 1) Assisting senior level engineer/architects in monitoring construction compliance AND 2) verifying contract administration data for accuracy. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR
- Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as :Architecture, Civil/Mechanical/Electrical.OR
- Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- Two year trial/probationary period may be required.
- Direct Deposit of Pay is required.
- This is a Career Program (CP) 18 position.
- Recent Graduates must sign a Participant Agreement with the Agency.
- This position has specific initial background investigation and periodic re-verification requirements since its duties require interaction with children and youth under the age of eighteen (18) years of age on a recurring basis.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
- You may claim military spouse preference.
- Multiple positions may be filled from this announcement.
- Salary includes applicable locality pay or Local Market Supplement.
- When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.gsa.gov/cdnstatic/FTR%20Bulletin%2018_05%20Relocation%20Allowances_0.pdf for more information.
- If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
- Conversion to Term is a project-based term of employment lasting between 1 & 4 yrs
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Basis for Rating: Qualified candidates will be assigned to one of three quality categories: Ideal Candidate, Strong Candidate and Eligible Candidate. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.
- Ideal: This category will be used for those candidates who have completed or will completed by June 30, 2018 a Baccalaureate/Masters/PhD program with a declared a major in Architecture or Civil/Electrical/Mechanical Engineering. The ideal candidate will have excellent grades and a GPA of 3.0 or higher and some related experience.
- Strong: This category will be used for those candidates who meet many of the criteria described above for the ideal candidate.
- Eligible: This category will be used for those candidates who meet the minimum qualifications of the position.