TECHNICAL PROJECT MANAGER

Employer
USAJobs
Location
Washington D.C.
Posted
Aug 14, 2018
Closes
Aug 14, 2018
Hours
Full Time
TRAVEL REQUIRED:

Occasional travel - You may be expected to travel for this position.


RELOCATION AUTHORIZED:
Relocation expenses reimbursed No


KEY REQUIREMENTS:
Help
  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). You must be certified as a Career Field S-Engineering Level II (Intermediate). Certification is required within 24 months of appointment.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  • Your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-03 pay band or (GS-9/11 equivalent) grade level in the Federal service or equivalent experience in the private or public sector as a Professional Engineer or Scientist performing project management related duties involving research, development, test evaluation, or life cycle support tasks in support of Acquisition Program.

    Additional qualification information can be found from the following Office of Personnel Management website:https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF

    IOR 08XX https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
    IOR 1301 https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/general-physical-science-series-1301/
    IOR 1310 https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1300/physics-series-1310/
    IOR 1550 https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/1500/computer-science-series-1550/

    Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

    If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume. See OPM's General Policies for information on crediting education.

    Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying for further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

    For the Professional Engineering Series (0801):
    Successful completion of a bachelor's degree (or higher) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
    OR
    Successful completion of a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above); or (IV) Related curriculum: Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

    For the Professional Physical Science Series (1301):
    Successful completion of a bachelor's degree or higher in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
    OR
    Successful completion of a combination of education and experience with education equivalent to one of the majors shown above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

    For the Professional Physics Series (1310):
    Successful completion of a bachelor's degree or higher in physics, or a related degree that included at least 24 semester hours in physics. Courses must have included a fundamental course in general physics and, in addition, course in any of two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.
    OR
    Successful completion of a combination of education and experience with courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education. Courses must have included a fundamental course in general physics and, in addition, course in any of two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.

    For the Computer Science Series (1550):
    Successful completion of a bachelor's or higher degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science.
    OR
    Successful completion of a bachelor's or higher degree with at least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.




    This position is covered by the Department of Defense Priority Placement Program.

    Several vacancies may be filled.

    A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

    Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf.

    THIS IS A DIRECT HIRE ANNOUNCEMENT. Sections 1112 & 1113 of the National Defense Authorization Act for Fiscal Year 2016 authorize the Secretary of Defense to recruit and appoint qualified candidates directly into certain scientific and engineering positions within the Department of Defense. Competitive rating and ranking of applicants do not apply to the Direct Hire process.

    Recruitment incentives may be authorized to eligible new hires.

    This position is eligible for part time, full time or ad-hoc telework at the discretion of management.

    Read more

    You will be evaluated for this job based on how well you meet the qualifications above.

    In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

    As vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyer. You will be rated based on the information provided in your resume, along with your supporting documentation.

    If selected, you may be required to provide additional supporting documentation.

    If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified.

    Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

    All qualification requirements must be met before being considered for any vacancies.

    Read more Security clearance Secret

    Drug test required No


    Similar jobs