The Department of Energy is seeking motivated and highly-qualified candidates for exciting positions available in multiple locations throughout the United States.The mission of the Energy Department
is to ensure America's security and prosperity by addressing its energy, environmental and nuclear challenges through transformative science and technology solutions.This series covers positions managing, supervising, leading, and/or performing professional engineering and scientific work.As a General Engineer, at minimum you will:
RequirementsConditions of Employment
- Use sound technical judgment and initiative to resolve the challenges of changing conditions and other problems relative to the assigned projects and programs.
- Use physics or mechanical, nuclear, electrical, chemical, civil, or industrial engineering theories, principles, and practices.
- Analyze situations, identify problems, probe causes, and recommends courses of action or solutions.
- Work closely with a team, perform assessments, clearly and concisely document assessment results, and present findings orally and in writing to the approval authority.
- Coordinate with related engineering and physical science fields adequate to effectively discuss technical points and to recommend acceptable engineering solutions to problems.
- Perform and interpret calculations, analyses, and computations for unknown factors or relationships primarily in the matters of factual nature of involving well understood mechanisms.
QualificationsYou must meet both the Basic Requirement and the Specialized Experience to qualify for this series as described below. See Basic Requirement in the Education section.SPECIALIZED EXPERIENCE REQUIREMENTS
- Must be a U.S. Citizen or National.
- This employer participates in the e-Verify program.
- Males born after 12/31/1959 must be registered for Selective Service.
- Subject to satisfactory security and suitability requirements.
- May be required to successfully complete a 1-year probationary period.
- Positions are located agency-wide and may be filled as permanent, term, or temporary with a full-time or part-time work schedule. Pay will vary by geographic location.
- Appointments made with this authority may be processed as a new appointment into the Civil Service.
- The vacancies filled through these appointments have varying levels of background investigative requirements, up to?a Top Secret -?DOE "Q" clearance.
- Positions may be covered by a bargaining unit. Bargaining unit will vary by departmental element, grade, and/or location.
- This position is eligible for full-time remote work. If selected, you will be required to sign a remote work agreement that details remote working conditions and expectations for the position. Work may only be performed from a location in the U.S.
The specialized experience listed are the minimum requirements for the series, each particular vacancy may have additional experience necessary to meet the applicable grade level.
A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level in the Federal service. Specialized experience for these positions are defined as:GS-11:
You must have one year of experience at a level of difficulty and responsibility equivalent to the GS-09
grade level in the Federal service. Experience includes providing support in the planning, development and implementation for components within the assigned programs/projects; assisting with the performance of assessments, and design reviews to evaluate contractor performance; prepares written evaluations to identify inadequacies or weaknesses; and assisting in identifying and resolving issues which could have an impact on the program/project.OR
3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree.OR
Combination of education and experience as described above. Less than one year of specialized experience may be combined with graduate education in excess of the amount required for the next lower grade level (i.e., credit hours beyond the first two years of full-time study may be credited).GS-12:
You must have one year of experience at a level of difficulty and responsibility equivalent to the GS-11
grade level in the Federal service. Experience includes applying engineering practices to ensure the project systems meet performance objectives; planning, and conducting projects/studies to evaluate and recommend ways to improve the efficiency of operations; providing recommendations to ensure projects/programs are coordinated in an efficient and cost-effective manner; and participating in the resolution of issues affecting assigned project.NOTE: There is no substitution of education for specialized experience at the GS-12 level.GS-13:
You must have one year of experience at a level of difficulty and responsibility equivalent to the GS-12
grade level in the Federal service. Experience includes conducting engineering research and studies to determine and recommend appropriate solutions to issues, interpret designs, and evaluate adequacy; conducting projects and /or studies within established financial and time constraints; developing and utilizing data collection techniques to assess project and program effectiveness; and interpreting and evaluating engineering drawings, specifications, and technical data packages.NOTE: There is no substitution of education for specialized experience at the GS-13 level.GS-14:
You must have one year of experience at a level of difficulty and responsibility equivalent to the GS-13
grade level in the Federal service. Experience includes analyzing the application of experimental theories and/or new applications and developments for research and development; developing strategies and tactics for future activities and to meet technology development goals; developing requirements, long term goals, objectives, and schedules for the accomplishment of applied research and development, and deployment of technologies; and preparing briefings , presentations, newsletters, and other communications to convey the status of research, project, or program.NOTE: There is no substitution of education for specialized experience at the GS-14 level.GS-15:
You must have one year of experience at a level of difficulty and responsibility equivalent to the GS-14
grade level in the Federal service. Experience includes developing and documenting research plans including associated budget plans in a timely manner; monitoring projects and providing high-level guidance to help resolve any project-related issues, including project modifications; developing and negotiating major agreements with other government agencies in the assigned new business areas; clarifying and making authoritative recommendations leading to decision making and resolution of critical issues; and evaluating complex technical issues and research results associated with the integration of technologies and recommend future program research needs.NOTE: There is no substitution of education for specialized experience at the GS-15 level.
"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.OPM Qualification Standards for the GS-0801 series can be found at the following website: OPM Qualification Standards for the GS-0801 series. CTAP/ICTAP candidates:
To be considered "well qualified" you must meet all of the requirements as described in this section. This public notice may be used to fill multiple positions as needed; therefore, applicants must meet the qualifications at the time the applications are reviewed.Education BASIC REQUIREMENT Degree
: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
ORCombination of education and experience
-- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
This vacancy has a positive education requirement. In order to be rated as qualified, you must provide copies of your college transcripts. Failure to provide copies of your college transcripts may result in a rating of "Ineligible".
If substituting education for specialized experience you must submit proof of your qualifying education. Failure to provide college transcripts may result in a rating of 'Ineligible'.
Education must be obtained from an accredited institution recognized by the U.S. Department of Education. Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website. Additional information
The U.S. Department of Energy fosters a diverse and inclusive workplace and is an Equal Opportunity Employer.
- This public notice is to gather applications for current and future vacancies that may or may not result in a referral or selection.
- Applications will expire 90 days after receipt.
- There may or may not be promotion potential depending upon the actual position filled.
- For general information on government-wide Telework polices visit: www.telework.gov
- Status and Non-Status applicants from outside DOE selected under this authority are required to serve a mandatory one (1) year probationary period. A DOE career status employee selected for this position may be required to serve a new one (1) year probationary period, pursuant to 5 CFR 315.802.
- Positions may be designated as a Testing Designated Position (TDP) and subject to testing for illegal drug use. A negative drug test must be obtained prior to being appointed into these positions and will be subject to random testing thereafter.
- If you believe that you are eligible for the Interagency Career Transition Assistance Program (ICTAP), please visit the OPM ICTAP/CTAP website for more information. In order to be considered under the ICTAP program, your application must score within the pre-established "well qualified" category as stated in the Qualifications section.
- More than one selection may be made under this hiring authority.
- Many positions require successful completion of a background investigation.
- Pay will be determined based on the duty location of the position; remote employees will receive the locality rate associated with the location of their remote worksite, typically the employee's place of residence. For more information on locality and pay scales, click here .
- Positions may be filled at varying levels of leadership, ie Team Lead, Manager, Supervisor.
- Supervisory positions may require a 1-year probationary period, if not yet completed.
- Hiring incentives may be authorized in accordance with regulation and policy.
- New employees to the Department of Energy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify
- Veterans and persons with disabilities are encouraged to apply. For more information, please visit the links at the bottom of this page or visit the FedsHireVets website.
- All males born after December 31st 1959 must abide by laws regarding Selective Service registration. To learn more about this law, visit the Selective Service web page, Who Must Register . If you are not registered and don't have an approved exemption, you will not be eligible for employment with the Federal government.
- Position may require you to submit a Financial Disclosure Statement, OGE-450, Executive Branch Personnel Confidential Financial Disclosure Report upon entering the position and annually (5CFR Part 2634, Subpart I USOGE, 6/08). For additional information and to obtain the form, please visit the Office of Government Ethics.
- EEO Policy: https://help.usajobs.gov/index.php/EEO_Policy_Statement
- Reasonable Accommodation Policy: https://help.usajobs.gov/index.php/Reasonable_Accommodation_Policy_Statement
- Veterans Information: https://help.usajobs.gov/index.php/Veterans_Information
- Selective Service Registration: http://www.sss.gov/