Duties

****This is an Open Continuous Announcement to establish a standing register of qualified candidates to refer as vacancies occur. The cut-off date for receipt/referral of applications will be 27-OCT-2022; after this date additional referral lists will be created as vacancies are available. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period stated in the announcement. ****

The NRO will make selections at the GG-12 level for this position

FOR CURRENT CIVILIAN FEDERAL EMPLOYEES APPLYING PLEASE SEE THE QUALIFICATIONS SECTION BELOW.

As a GENERAL ENGINEER you will be responsible for the following duties:

• Prepares, provides, and evaluates conventional plans, designs, design specifications, and related documentation.
• Determines and/or executes actions for a wide range of assignments involving combinations of complex features.
• Provides advice to senior colleagues and/or agency officials responsible for broad program operations.
• Serves as a technical authority and/or Contracting Officer's Technical Representative (COTR).
• Manages issues and risks to balance lifecycle cost, schedule, and technical performance.
• Conducts technical analyses and field and/or laboratory work to achieve desired products or services.
• Makes decisions and executes and/or directs actions exploring, reconciling, and resolving major uncertainties, unique situations, obscure problems, or conflicting objectives typically resulting from the abstract nature of the concepts or the existence of serious conflicts among scientific requirements, technological developments, standards, program direction, and administrative requirements.
• Provides recommendations on problems, conditions, programs, and functions to a broad customer base.
• Provides expertise and advice on program planning and policy-making functions covering a broad range of engineering, architecture, or scientific programs.
• Evaluates the value and applicability .of new or improved technology, strategies, trends, or applications.
• Performs other duties as assigned.

Requirements

Conditions of Employment

• Must be a US citizen
• Male born after 12-31-59 must be registered for Selective Service http://www.sss.gov
• Resume and supporting documents received by 11:59PM EST will be considered
• This is a Drug Testing designated position
• Position is a (DCIPS) position in the Excepted Service under U.S.C. 1601
• Must obtain/maintain Critical Sensitive TS/SCI clearance w/polygraph
• WORK SCHEDULE: Full Time
• OVERTIME: Occasionally
• TOUR OF DUTY: Flexible
• PCS (Permanent Change of Station): Not Authorized.
• FAIR LABOR STANDARDS ACT (FLSA): Exempt
• FINANCIAL DISCLOSURE: Required
• TELEWORK ELIGIBILITY: This position is NOT telework eligible
• COVID19: Please see, additional information.
• DAWIA: This is a Defense Acquisition Work Improvement Act (DAWIA) position
• Incentives (Recruitment/Relocation): Yes, may be eligible

Qualifications

This position is a Full Performance Level DCIPS position. DCIPS Full Performance positions include GG-12. The NRO is accepting applications from both current Federal Government employees and non-Federal Government employees for this position. Federal government employees, who are currently at a GS/GG-12 or equivalent level may ONLY apply for a lateral reassignment at their current grade level, and step.

**Federal applicants who exceed the advertised grade may voluntarily request acceptance at the lower grade IAW DoDI 1400.25 Volume 2006.

This position has a Basic Requirement for the 0801 series:
A. Degree: Engineering: To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

NOTE: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.

*NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.

The experience described in your resume will be evaluated and screened from the Office of Personnel Management's (OPMs) basic qualifications requirements. See: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf for OPM qualification standards, competencies and specialized experience needed to perform the duties of the position as described in the MAJOR DUTIES and QUALIFICATIONS sections of this announcement by 10/27/2022

Applicant must have directly applicable experience that demonstrates the possession of the knowledge, skills, abilities and competencies necessary for immediate success in the position. Qualifying experience may have been acquired in any public or private sector job, but will clearly demonstrate past experience in the application of the particular competencies/knowledge, skills, and abilities necessary to successfully perform the duties of the position. Such experience is typically in or directly related to the work of the position to be filled. Experience must be reflected in your resume.

Specialized experience required for this position is:

• Knowledge of multidisciplinary engineering or related science/engineering discipline, concepts, principles, practices, standards, methods, techniques, materials, and equipment sufficient to apply experimental theories, principles, and concepts to project development, execution, and advisory.
• Management skills to conceptualize and effectively lead complex analytic projects with limited supervision.
• Demonstrated experience in preparing analytical assessments and other written products with emphasis on clear organization, concise, logical presentation, to include an assessment or recommendation supported by data or research.
• Ability to apply analytic, diagnostic, and qualitative techniques sufficient to produce analytical products (such as test plans and final reports; Ability to employ imaging processing methodological approaches to analyze information.

Specifically you will be evaluated on the following competencies:
1. Organizational Awareness
2. Systems Engineering
3. Electronics Engineering
4. Technology Application
5. Contracting and Acquisition
6. Leadership

This position is Defense Acquisition Workforce Improvement Act (DAWIA): Acquisition Category S (Systems Planning, Research, Development, and Engineering) Level II and incumbent must meet appropriate certification requirements IAW the Defense Acquisition Workforce Improvement Act (DAWIA) no later than 24 months after accepting this position. Individual shall maintain, at a minimum 80 continuous Learning Points every 24 months via the services acquisition management system. DAWIA requirements may be located at the Defense Acquisition University website at the following link: http://icatalog.dau.mil/onlinecatalog/CareerLvl.aspx

Education

A. Degree: Engineering: To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

NOTE: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise.

Foreign Education: For further information, click on the following link: FOREIGN EDUCATION

For further information, click on the following link:
https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

This position is Defense Acquisition Workforce Improvement Act (DAWIA): Acquisition Category S (Systems Planning, Research, Development, and Engineering) Level II and incumbent must meet appropriate certification requirements IAW the Defense Acquisition Workforce Improvement Act (DAWIA) no later than 24 months after accepting this position. Individual shall maintain, at a minimum 80 continuous Learning Points every 24 months via the services acquisition management system. DAWIA requirements may be located at the Defense Acquisition University website at the following link: http://icatalog.dau.mil/onlinecatalog/CareerLvl.aspx

Additional information

VETERANS PREFERENCE CURRENT OR FORMER FEDERAL
In accordance with DoD Instructions 1400.25 Volume 2005, veterans preference is not required to be applied when considering candidates with prior Federal competitive or excepted service who have completed a probationary or trial period and have not been separated for cause. Therefore, veterans preference will not be applied to applicants with current federal service, or former federal civilian service meeting the above criteria.

COVID19 - To ensure compliance with an applicable preliminary nationwide injunction, which may be supplemented, modified, or vacated, depending on the course of ongoing litigation, the Federal Government will take no action to implement or enforce the COVID-19 vaccination requirement pursuant to Executive Order 14043 on Requiring Coronavirus Disease 2019 Vaccination for Federal Employees. Therefore, to the extent a Federal job announcement includes the requirement that applicants must be fully vaccinated against COVID-19 pursuant to Executive Order 14043, that requirement does not currently apply. Federal agencies may request information regarding the vaccination status of selected applicants for the purposes of implementing other workplace safety protocols, such as protocols related to masking, physical distancing, testing, travel, and quarantine.

Re-employed Annuitant: This position does not meet criteria for re-employed annuitant. The DoD criteria for hiring Re-employed Annuitants can be found at: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/1400.25-V300.pdf

All current and former civilian Federal employees must submit a copy of your latest SF50 (Notification of Personnel Action) showing your tenure, grade and step, salary, and type of position occupied (i.e., Excepted or Competitive); or similar Notification of Personnel Action documentation, i.e., Transcript of Service, Form 1150, etc.

Interagency Career Transition Assistance Programs: This program applies to employees who have been involuntarily separated from a Federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority for this position, you must: 1) meet ICTAP eligibility criteria; 2) be rated well-qualified for the position; Well qualified is defined as possessing the type and quality of experience that exceeds the positions minimum qualifications. and 3) submit the appropriate documentation to support your ICTAP eligibility. For more information:
https://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/

Other Notes:

• Applicants selected from this announcement may be required to serve a two-year trial period.
• If selected, Federal employees currently serving in the competitive service must acknowledge that they will voluntarily leave the competitive service by accepting an offer of employment for a DCIPS excepted service positions.
• If selected, NON-DCIPS candidates must acknowledge in writing that the position they have been selected for is in the excepted service and covered by DCIPS.
• Selection under this appointment authority does not confer civil service competitive status.
• All applicants must meet qualifications and eligibility criteria by the closing date of the announcement.
• This is not a Delegating Examining announcement.
• This is a DCIPS excepted service announcement.