Duties

• You will negotiate all changes within assigned authority.
• You will prepare independent Government cost estimates and funds reservations used for change orders.
• You will serves as the Contracting Officers Representative on all assigned contracts.
• You will review and approve and provide time impact analysis of contractors construction network analysis schedules.
• You will provide expert consultation on project schedules to include resource loading and computer based critical path analysis.
• You will review daily construction progress at project site as well as through the construction representative and construction reports.
• You will direct tests and studies to determine adequacy of design and construction.

Requirements

Conditions of Employment

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• Per the preliminary nationwide injunction on E.O. 14043, COVID-19 vaccinations will not be implemented or enforced. For more information on vaccine status and workplace safety protocol requirements see Additional Information below.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• You will be required to obtain and maintain a current valid United States driver?s license.

Qualifications

This position has a selective placement factor that will be used to screen out ineligible candidates at the GS-13 level. The selective placement factor is: You must have a current registration as an Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico. You must provide a copy of your current registration with your application.

FOR GS-13: In addition to the SPF and Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing duties such as: 1) Overseeing or providing construction engineering support for capital improvement projects and major facilities renovations; 2) Managing or providing significant assistance to the management of capital improvement projects from conception through close-out, to include scope, schedule and cost; 3) Monitoring construction contractor quality and safety programs via available data and metrics and by conducting site visits; 4) Providing recommendations for resolving project problems due to design errors, unforeseen conditions, or changes in criteria; and 5) Preparing and presenting briefs related to scopes of work, design reviews, contract negotiations, etc.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF.

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/

PHYSICAL DEMANDS: The work is generally sedentary with periodic need for site visits involving walking, climbing, bending and crawling to assess or inspect existing and new facilities and generally traversing construction sites. Occasional surveys and inspections of the Navy and Marine Corps' infrastructure will require some physical exertion (For example, crawlspace inspections, above and below deck pier evaluations, etc.).

WORK ENVIRONMENT: Work generally involves risks and observance of normal safety precautions typical of an office setting. However, field inspections are made which require protective clothing. Protective clothing worn in field inspections includes hard hats, reflective vest, hard-toed boots, safety glasses, and ear protection. Other protective wear such as safety harnesses, coveralls, and gloves may be required for certain situations. The incumbent is required to work in areas where certain potentially harmful physical and chemical agents are present. These agents may include but are not limited to: fumes, dust, noise, heat, ionizing and non-ionizing radiation, chemicals, etc. To ensure employee safety and health, NAVFAC FECs maintain personnel protection programs consistent with applicable laws and regulations. These programs include protective equipment (i.e. ear protection and respirator), and laws and medical surveillance. As part of medical surveillance programs, the incumbent may be required to take medical examinations to assess medical qualifications for duty involving these agents.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Applicants for the Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a bachelor's or higher degree in architecture.
OR
Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required).

Additional information

COVID VACCINATION INFORMATION: To comply with the recent preliminary nationwide injunction on Executive Order 14043, Requiring Coronavirus Disease 2019 Vaccination for Federal Employees, the Department of the Navy is not taking any action to implement or enforce the COVID-19 vaccination requirement. New hires will need to provide their vaccination status as well as comply with workplace safety protocols related to masking, physical distancing, testing, travel, and quarantine.

This announcement uses the Certain Personnel of the DoD direct hire authority to recruit and appoint qualified candidates to positions in the competitive service.

This position is eligible for part time, substantial or ad-hoc telework at the discretion of management.

A forty hour work week is typical for this position.

This position is being filled at the full performance level.

The incumbent may be required to work overtime. Overtime may be required but not guaranteed on a regular basis.

Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

This position is covered by the Department of Defense Priority Placement Program.

Several vacancies may be filled.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf .

Veteran's preference does not apply when selecting individuals under this specific hiring authority. However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.